Before using a refrigerated bath, refrigerated baths place a liquid medium in the tank. The liquid level is 30mm below the workbench, and the heater is not enough to energize it so as not to burn out.

Secondly, when using 220VAC/50Hz power supply, the equipment is well grounded.

3. Pump switch and cooling switch: Unless there are special requirements, do not press the forced open button of the circulating pump and the forced open button of the cooling compressor on the control panel. Press the circulating pump force switch to turn off the circulating pump. In other positions in the circulation system, the liquid in the water tank will cause temperature imbalance and affect the constant temperature effect. At this time, the circulation pump can be turned on again by pressing the forced switch of the circulation pump. The low-temperature temperature-controlled water tank presses the button on the forced switch of the air-conditioning compressor under automatic temperature adjustment, and the air-conditioning compressor is turned off. During automatic temperature control, the air-conditioning compressor is in a normal open operation state, so in this case, the temperature is stabilized by automatic heating, and after the compressor is turned off, the temperature cannot be controlled. Press the power button for one second to turn off the device. Press the start button for 1 second to restart the device and temperature control resumes.

4. The temperature adjustment device should be located in a ventilated and dry place, with a distance of more than 300 mm from obstacles behind and on both sides.

5. Refrigeration thermostat is finished, and the power switch is turned off. Please unplug the power plug. When not in use for a long time, the tank liquid should be loosened and wiped clean.

6. When the temperature exceeds 60, be careful to touch the surface of the temperature control tank to avoid hand heating.

There are many thermostats with the same name, including constant temperature water tank, constant temperature bathtub, constant temperature water tank, constant temperature circulator, electric heating constant temperature water bath, etc. Generally, the resistance wire is used for heating, the auxiliary compressor is cooled, and the PID controller is used to keep the relative standard temperature unchanged to achieve the experimental purpose.

The constant current DC series low temperature temperature control tank is a high-precision constant temperature source that provides self-cooling and heating.

Refrigeration constant temperature bath is composed of petroleum, chemical, electronic instruments, physics, chemistry, biological engineering, medicine and health, life science, light industrial products,

Refrigeration thermostatKey features:

1. Built-in constant current temperature control program to ensure stable operation of the equipment.

2. (Domestic exclusive) Fully enclosed compressor cooling, the cooling system has multiple protection devices for overheating and overcurrent.

3. The circulating pump can pull out the constant temperature liquid from the water tank to create a second constant temperature field.

4. The cold liquid in the park can be used for external factors and the experiment container outside the cooler, and low temperature and constant temperature experiments can be carried out directly in the park.

5. Using XMT analog and digital PID automatic control system, temperature digital display. 6. The interior walls and countertops are all stainless steel, clean and hygienic, beautiful and corroded.

7. The DCW series is a horizontal series that can be easily placed inside a desktop.