Language
新闻中心
细节塑造精品 诚信铸就品牌
Your location:
Homepage
-
-
Correct operation and use of low temperature thermostat

Correct operation and use of low temperature thermostat

  • Categories:News
  • Author:
  • Origin:
  • Time of issue:2022-06-02
  • Views:0

(Summary description)The cryogenic thermostat is suitable for various fields, various types and types of precision instruments and equipment. How to operate it correctly is also a problem we have always been concerned about. Then, let's learn about the correct operation and use of the cryogenic thermostat!

Correct operation and use of low temperature thermostat

(Summary description)The cryogenic thermostat is suitable for various fields, various types and types of precision instruments and equipment. How to operate it correctly is also a problem we have always been concerned about. Then, let's learn about the correct operation and use of the cryogenic thermostat!

  • Categories:News
  • Author:
  • Origin:
  • Time of issue:2022-06-02
  • Views:0
Information

The cryogenic thermostat is suitable for various fields, various types and types of precision instruments and equipment. How to operate it correctly is also a problem we have always been concerned about. Then, let's learn about the correct operation and use of the cryogenic thermostat!

Low temperature thermostat operating procedures

1. Before using the thermostatic tank, liquid medium should be poured into the tank, and the power should not be turned on when the liquid level is 30mm below the workbench. Make sure the heater doesn't burn out of lack of liquid, in 3 minutes I'll show you how to use the cryostat.

2. When using 220VAC/50Hz power supply, the equipment should be well grounded.

3. Pump switch and refrigeration switch: without special requirements, do not press the forced operation button of the circulating pump and the forced operation button of the refrigeration compressor on the control panel. Press the circulating pump force switch to turn off the circulating pump. The temperature of the bath liquid is uneven at different positions in the circulation system, which affects the constant temperature effect. In this case, the circulator can be turned back on by pressing the force switch on the circulator. Press the button of the forced switch of the refrigerant compressor under the automatic temperature control of the cryostat, and the refrigerant compressor will be turned off. Because in the case of automatic temperature control, the refrigerant compressor is in a normally open operation state, and the temperature at this time is stabilized by automatic heating, and the temperature cannot be controlled after the compressor is turned off. Please press the start button for 1 second to turn off the device. After pressing the start button for 1 second, the temperature control can be restarted by restarting the unit.

4. The low temperature thermostat is placed in a ventilated and dry place, and the rear and both sides are more than 300mm away from obstacles. Put the machine in a good working environment to prolong the life of the machine and ensure the normal use of the machine.

5. When the use of the low temperature thermostat is over and the power switch is turned off, please unplug the power plug. When not in use for a long time, please drain the tank fluid and scrub it clean.

6. When the temperature exceeds 60, be careful to touch the surface of the thermostat to avoid burning your hands.

How to use the low temperature thermostat to adjust correctly:

1. Structure: The low-temperature thermostatic bath is a rectangular metal structure, the outer shell is made of cold-rolled steel plate, and the stainless steel inner tank, digital thermostat, power supply, stirring motor, and pump are all installed in the control box.

2. Scope of application: The low temperature thermostat is suitable for high-precision constant temperature direct heating and freezing, as well as auxiliary heating and freezing in the fields of biology, chemistry, physics, plants, chemical industry and other scientific fields.

3. How to use: Before use, please read the manual carefully, be familiar with the various parts of the instrument and the control panel, and use a megohmmeter to measure whether the power supply, plug, and ground wire have poor insulation or short circuits. The experimental temperature can be set by setting the temperature, and the experiment can be started after the temperature is fixed. Distilled water can be used for this constant temperature heating decomposition substance, and river water and hard water are prohibited. When using tap water, in order to prevent the influence of scale accumulation on the thermostatic sensitivity, please clean the thermostatic pot once after use.

4. Temperature setting: Press the SET key to set or display the temperature set point. After pressing the SET key, the text on the code tube starts to flash, which means that the instrument has entered the setting state, and the set value becomes larger when the key is pressed. Press the key to make the set value smaller. Press and hold the key or key for a long time, and the data changes rapidly. Press the SET key again, and the instrument returns to normal working state. After setting the temperature, the heating and circulating pump switches can be turned on.

5. Maintenance: When repairing the regulator or replacing the heating tube, just disassemble the control.

The above is the correct operation and use method of the low temperature thermostat. If you want to know more, please feel free to contact us!

Keyword:

Scan the QR code to read on your phone

Nimeng Technology

Follow Nimeng Electronics

Taian Nimeng Electronic Technology Co., Ltd.

Hotline:+86-400-646-8801 

Tel:+865388588768

Fax:+865388588769  

E-Mail:tanimeng@126.com
Address: East of Panhe Street, Taishan District, Tai'an City, Shandong Province

版权信息

Time of issue:2020-11-20 09:05:16

Copyright © Taian Nimeng Electronic Technology Co.,Ltd. 鲁ICP备11009995号 Powered by www.300.cn